0 votos

 Dust-extraction systems were attached to the [url=http://www.cnyouna.com/packing-machine/]packaging machines[/url], the sugar screening equipment, and the mills for powdered-sugar production, to remove sugar dust. The dust-extraction ducts were connected to dry dust collectors. However, it was found that the maintenance of the dust-collection system had been poor. In addition, some equipment was significantly undersized or incorrectly installed. Some dust ducts were found to be partially, and in some locations, completely filled with sugar dust.

    

    The plant had hired an outside consultant to evaluate airflows, pressure drops, and other operating parameters on both the dry and the wet dust-collection systems. The report identified numerous design and maintenance deficiencies. Because the report was delivered only a few days before the 2008 catastrophe, there had been no opportunity to review or act on it.

    

    In addition, during the investigation following the 2008 catastrophe, it was found that sugar conveying and processing equipment were not adequately sealed to prevent spillage of significant quantities of sugar onto the adjacent floors. Less than 2 months before the catastrophe, an internal inspection by company supervisors and quality assurance personnel learnt that many tonnes of spilled sugar had to be removed from the floors at intervals and returned to the refinery for reprocessing. Packaging operators and other employees also reported significant amounts of sugar dust escaping the packaging equipment into the working areas.

    

    The systems for conveying maize starch to be mixed with the granulated sugar, the grinding mills, and the powdered-sugar [url=http://www.cnyouna.com/packing-machine/vertical-packing-machine/]vertical packing machine[/url] all generated significant quantities of sugar dust and maize starch in the work area. Workers reported that airborne sugar dust and spilled sugar in the powdered-sugar processing and packaging work areas were a constant problem and that significant accumulations were often seen on equipment and on the floor. One worker told that he used a squeegee to clear a path on the floor through spilled powdered sugar to get to equipment he operated during his shift.

    

    Packaging equipment unwinds materials from its roll, forms it into the shape of a container, fills it with product, and seals the container. Printed material should, of course, reflect the container’s length (the “cutoff”) and its width (the “web”). Web and cutoff can be no more precise than as initially printed, but any subsequent web handling can introduce additional variability to both. Slitting defines a roll’s edge that must parallel to the machine direction of the printing process. Figure 6.1 suggests the challenge. Three impressions on the right have a light-colored border and three on the left have a darker border. Slitting between the third and fourth impressions (cut No. 3) is likely to produce a wavy line with alternating strips of either color. They would appear on the right edge of the third roll and left edge of the fourth roll. When print extends to (and through) a slit edge as in Figure 6.1 (called a “bleeding edge”) its color must be uniform for a width at least as great as the side-to-side tolerance of the slitting operation.

    

    Once the contract has been agreed, the processes of design and construction may commence. These lead to the manufacturing site acceptance trials, which would include a full validation of all the operational requirements of the machine. The final stage is delivery, installation and commissioning, at which the performance of the machine is assessed to ensure that the required operational performance has been achieved.

por (280 puntos)

Preguntas relacionadas

0 votos
0 respuestas
preguntado por Fyugy452 (330 puntos) Oct 29, 2021
0 votos
0 respuestas
preguntado por lildaik25 (300 puntos) Oct 13, 2021
0 votos
0 respuestas
0 votos
0 respuestas
0 votos
0 respuestas
TurismoEEUU respuestas
es un sitio donde puedes realizar preguntas y recibir respuestas de la comunidad.

Redes sociales

...